I am not sure that I completely understand your problem because according to usb_modeswitch your device is in the modem mode i.e the device ID 0x0031 is for modem. This is from the device_reference.txt file available on usb_modeswitch site: ######################################################## # ZTE MF622 (aka 'Onda MDC502HS') # ZTE MF626 # ZTE MF628+ (tested version from Telia / Sweden) # ZTE MF633 # ZTE MF636 (aka 'Telstra / BigPond 7.2 Mobile Card') # ZTE MF637 # # Contributor: Joakim Wennergren and others DefaultVendor= 0x19d2 DefaultProduct= 0x2000 TargetVendor= 0x19d2 TargetProduct= 0x0031 MessageContent='1e' MessageContent2='1b' NeedResponse=1 As you can see the target ID for your device is 0x0031 which means that your device is in modem mode.

So if you are having this problem at system startup then try plugging your device in after the system boots into Ubuntu and not before. But if you are having problem when reconnecting the device for example if it got disconnected because of a network problem, then you will need to unplug and replug the device. UPDATE I just installed usb_modeswitch and found out that all entries in the config file are commented. So open /etc/usb_modeswitch.conf and look for a line containing;TargetProduct= 0x0031 Remove semi-colon (;) from start of the following lines;DefaultVendor= 0x19d2;DefaultProduct= 0x2000;TargetVendor= 0x19d2;TargetProduct= 0x0031 # only for reference # MessageEndpoint=0x01;MessageContent='000000000000' Now save and close this file. You will need sudo privileges for this. Now unplug and replug your device and I believe it should work.

Brs Pencil Tool Plugin Download. You have searched for packages that names contain usb-modeswitch in all suites, all sections, and all architectures. Found 2 matching packages. How to write a USB stick with Windows. How to write a USB stick with Windows.

If it doesnt then comment the MessageContent line and un-comment (remove semi-colon) the second MessageContent line which is just below the first one. The problem is basically this. After getting into the desktop. If I plug in the device, it comes up on the desktop as a usb or cd drive which I can use as a normal storage location. I don't want this to happen when I plug in the device. When I plug in the device, I want it to be recognised as a modem. At the moment, I have to plug in the device, eject it, then it gets recognised as a modem.

The lsusb I provided is after I have ejected the device, which I think means that I need to give you the output of lsusb before ejecting the device? – May 19 '11 at 10:44 •. I have same problems with my modem on 12.04. All you have to do are the following things: First install USB_modeswitch on your computer. Try to download it from Software Center or Synaptic package manager. Also check for libusb in synaptic.