Unhook both battery cables and short them together to discharge the capacitor that fires the air bag. Then you need to get in the passenger compartment and look under the seats for any connections that attach to the seat. Disconnect these. You then need to use tools to remove the bolts that hold the seat frames to the body and remove the seats. If you put in different seats or don't have the same connections as the old ones, you will have SRS errors on the BCM and the airbags and tensioners wont work. When you are done reconnect the battery cables, Feb 20, 2016 .

Apr 25, 2008 Hi Folks Can anyone tell me? Apostilas Pdf Telecurso 2000. To remove the front seat from an 02 Picasso, If the wires are disconnected under the seat, are there any consequences? Hi Folks Can anyone tell me? To remove the front seat from an 02 Picasso, If the wires are disconnected under the seat, are there any consequences?

These cars, with engine and steering all done up front, can be rough on the steering and suspension components. You want to look at and/or replace the end links, the swaybar links (not likely your problem, but probably needs replacement) and the strut bearing and the spring seat. The spring seats are superseded by the XC90 version these days. Xilog Maestro Software Download. It's far sturdier and lasts longer. Oh, balljoints too. All these parts are relatively cheap and you can do it yourself if you have the tools and a lazy weekend. You might also want to check that your brakes aren't touching/binding.

I don't remember if these are the sliding calipers, but if so, they could stand a cleaning re-lubing. If you still think it's the tires/wheels, you can find a place to have them 'road force balanced' which puts weight on them to detect defects in the tire that only show up under speed and load. Sep 09, 2014 . There are two fuse blocks on a 2003 Deville, there is one located under the hood in the engine compartment on the left side (left as your looking at the car) right in front of your overfill tank for your radiator/coolant, but I think the fuse your looking for is located in the secondary block which is UNDER the back seat (along with the battery). Push the seat in from the front toward the back firmly, but gently, then carefully lift the entire back seat up - there is a wiring harness conector that you will ned to disconnect while you have the seat up (thus why you dont want to just push in and yank up the seat ). Remove the botom back seat from the car.